Model: IC697PWR724
Brand: GE Fanuc (Emerson)
Series: Series 90-70 PLC
Module type: Rack power module, occupying a single slot, must be installed in the leftmost power slot of the rack, with a 48 pin backplane connector
Support: Single rack/dual rack power supply (total load ≤ 90W, requires matching interconnection cables)
Weight: Approximately 0.72 kg
Indicator lights: POWER OK, FAULT fault indicator light
Enter electrical specifications
Nominal input: 24 VDC
Input voltage range: 18-32 VDC (wide voltage)
Maximum input power: 160   W
Surge withstand: Maximum 22 J
Ride Through: ≥ 10 ms @ 20 VDC input to achieve safe power down reset of the system
Backboard output specifications (maximum total output power of 90   W)
Maximum output voltage and current+5   VDC18   A+12   VDC1.5   A -12   VDC1-A
Output and generate system signals: ACFAIL, SYSRESET, to achieve power failure alarm and PLC timing reset. Built in protection: overvoltage, overcurrent, short circuit protection; 5V bus electronic short circuit protection.
environmental conditions
Working temperature: 0 ℃~+60 ℃ (inlet air temperature)
Storage temperature: -40 ℃~+85 ℃
Humidity: 5-95%, no condensation
Shock resistance: 30 g, 11 ms; vibration: 1 g (5-2000 Hz)
Certification: UL, CSA, CE
Project IC697PWR720 IC697PWR724 type PSA power adapter (without DC-DC) complete power module (built-in DC-DC) input external independent power supply, through IC697CBL700 cable direct 24VDC terminal input and output power depends on the external power supply maximum 90W5V output 18A18A

Recommended other models：