Module type: 24VDC 32 point leakage output (Sink), transistor output module, single slot

Electrical Specifications

Output points: 32 points, 4 isolation groups x 8 points

Output type: DC transistor, Sink type, current injection module

Rated output voltage: 24 VDC; Working voltage range: 19.2-30 VDC

Maximum output current per point: 0.5A; maximum 4A per group; total maximum 16A per module

Logic state: When the output is ON, it conducts to 0V; when it is OFF, it has high resistance

Response time: Typical ON=0.1ms; OFF=0.2 ms

Backboard 5VDC power consumption: 0.40A

Isolation and Voltage Resistance: On site Backboard 1500V RMS; Inter group isolation 500V RMS

Protection: Electronic overcurrent and short circuit protection for each channel; Automatic shutdown of faulty channel

Attention: There is no fuse inside the module, and it is recommended to configure a fuse for the external circuit

hardware features

LED status indicator lights for each channel

I/O address software configuration, no dialing, no jumper, mechanical error prevention key

Applicable loads: 24VDC solenoid valve, indicator light, solid-state relay, sensor power supply

Occupy one slot in a 90-70 rack

environmental parameters

Standard operating temperature: 0-60 ℃; Expansion -40~+70 ℃

Storage temperature: -40 to+85 ℃

Humidity: 5-95% RH, no condensation; IP20 (inside the cabinet)

Weight: Approximately 0.30 kg

Recommended other models：