Basic Information

Adaptation: Series 90-70 PLC rack, must install the leftmost power slot of the rack, single slot position

Function: Only provides+5V logic power supply to VME backplane, no on-site 24V output

Heat dissipation: fanless natural convection

Version difference: The H version is the final version of the 710 series, which improves internal filtering and component reliability, fixes some high-temperature aging hazards in the early F version, maintains the same electrical parameters, and is directly compatible with replacing A/F/G versions

Panel LED

AC OK (green): Input power supply is normal

Fault (red): Overvoltage, overcurrent, overheating fault alarm

wiring

L1, N: AC input, also connected to DC 100-150VDC

PE protection ground: It is recommended to connect AWG # 12 copper wire to the frame protection ground

Recommended AWG # 16 copper wire for signal terminal wires

environmental conditions

Working temperature: 0 ℃~+60 ℃

Storage temperature: -40 ℃ to+85 ℃

Humidity: 5-95% RH, no condensation

Vibration: 2g, 10-500Hz

Protection: IP20 (inside the rack)

Certification: UL, CSA, CE

Key usage points

Can only be inserted into the leftmost slot of the rack, ordinary I/O slots cannot work; The power supply to the second rack can be extended through cables, and the total load must not exceed the upper limit of 56W.

The selection must calculate the total 5V power consumption of all modules in the rack, and the total cannot exceed 56W; upgrade the IC697PWR720 (100W/20A) for high load racks.

Only provide PLC backplane logic power supply, on-site sensors and solenoid valves must be equipped with external independent power supply for 24V.

IC697PWR710H ≠ 90-30 series IC693PWRxxx, the two cannot be mixed.

Recommended other models：