IC697CPX928-CD belongs to GE Fanuc Series90-70, a single slot high-performance 32-bit floating-point CPU; The suffix – CD represents the product version identification, and the hardware specifications are completely consistent with the IC697CPX928 body. The processor Intel 80486DX4 has a clock speed of 96 MHz, a Boolean instruction execution speed of 0.4 μ s per instruction, and hardware native floating-point operations; Firmware storage onboard Flash, supports online firmware upgrade, no need to replace EPROM chip 66plc.com.

Memory configuration: 6MB lithium battery backup CMOS RAM, 256KB non-volatile Flash memory, Flash can save user programs without relying on batteries. Supporting lithium battery part number IC697ACC701; The nominal lifespan of the battery at 20 ℃ is 5 years, and the RAM data in power-off state is nominally stored for 6 months. Built in real-time calendar clock, with a maximum daily time error of 3.5 seconds; The maximum accuracy of the time timer is 0.01%. Panel three level hardware mode switch: RUN output enable, RUN output disable STOP； Equipped with a memory protected key switch and software multi-level password overlay to prevent unauthorized modification of the program.

I/O processing capability: Maximum discrete I/O of 12000 points, arbitrary mixing of input and output; Maximum analog I/O of 8000 points. Compatible with the full range of IC697 local I/O, co processors, and communication modules, supporting Genius remote I/O IC660/IC661 series; Exchange data with other modules in the rack through the VME-C.1 backplane. Default hardware installation location: slot 1 of rack 0.

Onboard three independent SNP serial ports: Port1 RS-232 (RJ11); Port2 RS-485 optocoupler isolation; Port3 RS-485 without isolation; Comes with a factory reset port. Used for program download, monitoring, and serial port peripheral docking; **No onboard Ethernet port * *, TCP/IP Ethernet functionality requires an external LAN communication module for expansion. Programming software LogicMaster90, compatible with MS-DOS and early Windows platforms.

Backboard power supply 5VDC, rated current 3.1A. Front panel has 7 LEDs: OK self-test, RUN operation, output enable, FAULT fault, and three serial communication activity indicators. Fault diagnosis information is reported to the PLC system and system events can be recorded.

Temperature conditions: 0-50 ℃ without forced air cooling; Under 70CFM forced air cooling conditions, it can be extended to 0-60 ℃; Storage -40-85 ℃, humidity 5-95%, no condensation. The external dimensions are 177.8 mm × 120.7 mm × 50.8 mm, and the weight is approximately 0.5kg.

Software features: Multi program architecture, supports large capacity user programs, with only one LD/SFC main program. Support dual CPU hot standby in IC697CHS770 redundant rack.

Recommended other models：