Brand: GE Fanuc/Emerson
Series: Series 90-30 PLC
Module type: 16 point 24VDC digital input, source/sink universal (Source/Sink)
Overview
16 channel 24VDC input, supporting two types of sensor connections: source and drain, without the need for jumper switching
When the input is valid, the corresponding bit of PLC input table% I is logic 1
Applicable: 24V button, photoelectric, NPC/PNP proximity switch
No electrical isolation, all channels share a common COM
Occupying 1 I/O slot, can be installed in any IO slot on the 5/10 slot motherboard
hardware feature
16 green LEDs, channels 1-16, input connected and lit up
Flip terminal door, label insert can be handwritten for circuit identification; Blue Mark (DC Input)
Screw terminal, on-site 24VDC power supply provided by external user
Electrical specifications
16 points, source/sink dual-use
Rated voltage 24VDC, operating range 19.2-30VDC
Typical input current 7mA @ 24VDC
Conducting voltage ON ≥ 15VDC
Disconnect voltage OFF ≤ 5VDC
Response time OFF → ON maximum 8ms; ON → OFF maximum 8ms
Isolation without isolation, common end COM
Backboard 5V bus current 110mA
Working temperature 0-60 ℃, 5-95% RH, no condensation
Key Tips
Without isolation, a short circuit on the on-site side will affect all 16 channels.
Compatible with NPN (drain type Sink) and PNP (source type Source) sensors, directly compatible with on-site wiring without changing module settings.

Recommended other models：