GE IC660BBD101｜Genius I/O｜

IC660BBD101

1、 Channel configuration
Quantity: 8 independent I/O channels, 8 points per group
Mode: Each channel software can choose input (normal/tri state)/output
Wiring: 115VAC AC, no additional power supply required (power source from I/O circuit)
2、 Digital input (when channel is set as input)
Rated voltage: 115VAC (93-132VAC), 47-63Hz
Input impedance: high impedance, low leakage
Response time: 2ms (basic)+software filtering (10/20/50/100ms)
High level: ≥ 74VAC; Low level: ≤ 40VAC
Diagnosis: Open circuit, short circuit, overheating, and three state fault detection
3、 Digital output (when channel is set as output)
Output type: Triac, AC switch
Rated voltage: 115VAC (93-132VAC), 47-63Hz
Each current: 2A (continuous), surge 25A/2 cycles
Total output current: 15A (35 ° C)/7.5A (60 ° C)
Conduction delay: ≤ 1 cycle（ 16.7ms@60Hz ）
Protection: Electronic fuse (>30A/instantaneous or>20A/2 cycles, turn off within 5ms)
Recovery: CPU/Handheld Command Reset
Leakage current: ≤ 1mA (off state)
4、 Electrical and Isolation
Working voltage: 93-132VAC (nominal 115VAC), 47-63Hz
Isolation strength: 1500VAC/1 minute (between modules, channel to ground)
Power consumption: standby 8.5W; 8-channel output full load 43.5W
Power down maintenance: 1 cycle（ 16.7ms@60Hz ）
5、 Environment and Physics
Working temperature: 0 ° C~+60 ° C
Storage temperature: -40 ° C~+85 ° C
Relative humidity: 5% -95% RH (without condensation)
Vibration: 5-10Hz: 5.08mm displacement; 10–200Hz：1G
Impact: 30g (11ms)
Dimensions (mm): 224.4 (length) x 84.8 (width) x 99.3 (height)
Weight: Approximately 1.8 kg (4 lbs)
Installation: 35mm DIN rail or panel installation
Protection: IP20 (to be installed inside a protective cabinet)

GE IC660BBD101｜Genius I/O｜