Our company specializes in importing industrial control spare parts, and we can help you transfer most of them from abroad. Due to the wide variety of models, we were unable to upload physical pictures one by one!
If the model you need cannot be found in our store, please feel free to inquire at any time.
GE H201CI-1｜One-Channel Controller｜
Technical Specifications
1. Measurement and Performance
Monitoring gases: hydrogen (H ₂), carbon monoxide (CO), acetylene (C ₂ H ₂), ethylene (C ₂ H ₄) (composite gas response).
Measurement range: 0-1000 ppm (configurable).
Accuracy: ± 2% reading; Resolution: 1 ppm.
Response time:<30 seconds (typical).
2. Electrical and Power Supply
Working power supply: 100/115/200/230V AC ± 10%, 50/60Hz, ≤ 120VAGE Vernova.
Analog output: Isolation/non isolation optional, supporting 0-1mA, 4-20mA, 0-1V, 0-10V (jumper configuration).
Digital Communication:
RS-485: Can connect up to 32 H201Ci controllers in series, with a total length of 1300mGE Vernova.
RS-232: Direct connection to computer or modem (local configuration/data upload).
Alarm contact: 3-channel C-type relay (gas high, high high, system fault), 5A/250V AC.
3. Environment and Physics
Working temperature: -50 ° C~+55 ° C (with built-in heater, suitable for low temperature environment) GE Vernova.
Protection level: NEMA 4X/IP66 (dustproof and waterproof, suitable for outdoor/harsh environments) GE Vernova.
Size: Approximately 250 × 200 × 100mm; Weight: Approximately 5kg.
Certification: UL 508, CSA C22.2, IEC 60255, IEEE C37.90GE Vernova.
H201CI-1
Application
Power transformers/reactors: online monitoring of oil and gas in 110kV and above main transformers, station transformers, and converter transformers.
Industrial oil filling equipment: monitoring the insulation oil status of large motors, generators, and high-voltage capacitors.
There are no reviews yet.