ABB GJR2395400R1210 83SR06B-E｜Module｜

83SR06B-E

Specification
6-channel mechanical relay digital output card (DO relay board)
Number of channels: 6 independent SPST normally open relay contacts
Contact rated load
Communication: 250VAC/5A resistive; Reduce the inductive load capacity to 3A
DC: 30VDC/5A
Each channel has an independent operating status LED indicator light, which lights up for easy on-site inspection
Backplane bus interface: Procontrol P13 standard rear bus slot, rack mounted plug-in card installation

Function
System logic passive dry contact output, driving on-site solenoid valves, alarm light signs, circuit breaker auxiliary circuits, sound and light alarms, auxiliary start stop circuits
The relay isolates the internal 5V logic circuit from the on-site 220V strong current circuit, and is resistant to strong electromagnetic interference from power plant excitation and frequency conversion equipment
Single channel independent short circuit protection, on-site line short circuit will not burn the entire board
The backplane uploads 6-channel contact action status and module hardware fault diagnosis information to the CPU, and the upper screen can monitor channel status

Parameter
Backpanel power supply: Rack 5VDC logic power supply
Overall power consumption of a single module: ≤ 3.5W
Insulation withstand voltage: relay contact side ↔ On board logic side 2000V AC
Working temperature: 0 ℃~+60 ℃ (standard operating condition of power plant control cabinet)
Storage temperature: -40 ℃~+85 ℃
Protection: IP20, only for use inside enclosed control cabinets

ABB GJR2395400R1210 83SR06B-E｜Module｜