GE IC670MDL730｜output module In Stock｜

Core electrical parameters
Channel: 8-point DC source output (PNP, output positive voltage)
Output voltage: 24VDC, powered by an external on-site power supply
Single channel rated current: 2A; maximum total current per module: 8A
Output type: transistor source type (PNP)
Backboard power consumption: 110 mA (6.5V backplane)
Isolation: On site load side ↔ PLC logic side photoelectric isolation, 1500VAC 1min withstand voltage; No isolation between channels
Protection: Each channel is equipped with built-in short-circuit and overcurrent protection; Report fault status to BIU/CPU
LED: power indicator light+8-channel status light
Data: 8 outputs occupy 1 byte of output buffer, mapped to Genius bus
Environment: Operating temperature range of 0 ℃ to+55 ℃; Storage -40 ℃ to+85 ℃; UL and CE certification
Features: I/O module supports hot plugging, module recognition, fault diagnosis uploaded to the main PLC
Key functions
PNP source output, external output+24VDC, drives solenoid valve, small contactor, indicator light.
Maximum 2A per point, can directly drive most 24V solenoid valve coils; It is recommended to add a relay in the middle for heavy loads.
Channel short circuit/overload protection, single fault will not damage the entire module, and fault alarm will be uploaded.
Hot swappable online replacement without interrupting Genius bus communication.
Receive output instructions from BIU or IC670CPU350, controlled by the upper level 90-30/90-70/RX3i via the Genius bus.
Typical Engineering Application Scenarios
Remote I/O station for power plant auxiliary equipment: drives local solenoid valves, sound and light alarm lights, and small contactor coils; Cooperate with MDL640/MDL644 input modules to form a complete remote control point.
Metallurgical conveying lines, water treatment sites: remote distributed station output control valves, local indicator lights.
IC670CPU 350 Local Intelligent Station: Local logic directly drives on-site execution devices, reducing bus latency.