GE IC660BBA104 6231BP10910｜Analog I/O Block｜

1、 Analog input (4-channel, independent configuration)
Input range (software optional):
0–10 VDC
±10 VDC
±5 VDC
0–5 VDC
4-20 mA (equivalent to 1-5 VDC)
Resolution: 12 bits+sign bit (a total of 13 bits)
Accuracy: ± 0.2% full scale at 25 ° C; Full temperature range ± 0.5% full scale
Input impedance: voltage ≥ 1M Ω; current ≤ 250 Ω
Filtering: Software optional (none/8/16/32/64/128/256/512/1024 ms)
Isolation: Channel to bus isolation 1500VAC

2、 Analog output (2-channel, independent configuration)
Output range (software optional): Same input (0-10V/± 10V/± 5V/0-5V/4-20mA)
Resolution: 12 bits+sign bit
Accuracy: ± 0.2% full scale (typical)
Driving capability: Voltage: ≥ 5mA; Current: ≤ 750 Ω Load
Update rate: 4ms/channel
Isolation: 1500VAC isolation between output and bus

3、 Electrical and Environmental
Power supply: 18-56 VDC (nominal 24/48 VDC)
Power consumption: ≤ 4W (approximately 160mA at 24VDC)
Working temperature: 0 ° C~+60 ° C
Storage temperature: -40 ° C~+85 ° C
Relative humidity: 5% -95% RH (without condensation)
Vibration: 3g (5-500Hz)
Impact: 30g (11ms)

4、 Communication and Function
Protocol: Genius Bus (Dedicated Serial Bus)
Topology: Twisted pair, up to 32 nodes, up to 2km in length
Diagnosis: Open circuit/short circuit/over range fault report, can be turned off
Configuration: Independent measuring range, filtering, alarm upper and lower limits for each channel
Compatible handheld device: IC66 * HHM500 (on-site configuration/monitoring)

5、 Physical characteristics
Shell: cast aluminum, industrial protection
Dimensions (mm): 120 (width) x 80 (height) x 40 (depth)
Weight: Approximately 0.4 kg
Installation: Standard 35mm DIN rail
Wiring: 32 pin terminal block (1-4 bus, 5-32 field signal)

IC660BBA020

GE IC660BBA104 6231BP10910｜Analog I/O Block｜

Recommended other models：