All products on this website are discounted products, and market prices have been fluctuating. Please refer to customer service quotes for details. Pictures are not actual photos. Before placing an order, please confirm the model, product, price, and other detailed information with customer service. Both second-hand and brand new products are available for sale on this website. Please contact customer service for further communication.

MOTOROLA MVME2431｜VME Processor Module｜

MOTOROLA MVME2431｜VME Processor Module｜illustration
1. Processor
CPU: Motorola MPC750 PowerPC G3 (PowerPlus II architecture)
Main frequency: 350 MHz
L1 cache: 32KB instructions/32KB data
L2 backend cache: 1MB full speed backend cache
Architecture: 32-bit PowerPC with hardware FPU floating-point unit
2. Memory&Storage (MVME2431 factory standard)
System memory: 32MB PC100 DDR ECC SDRAM (onboard ECC checksum)
Maximum expandable: 512MB
Start Flash: 8MB NOR Flash (firmware/BOOT)
NVRAM: 8KB battery backup SRAM+RTC real-time clock
3. VME bus interface
Bus: VME64 32-bit A32/D32
Support VME master/slave mode DMA、 Multi level interrupt, bus arbitration
Does not support 2eSST (different from MVME6100)
4. Expansion slot
2 x PMC 64 bit PCI-X mezzanine slot (IEEE P1386.1), expandable for I/O, FPGA, network port, and acquisition card
5. Front panel interface (standard)
1 × 10/100Mbps Ethernet RJ45 (non gigabit)
1 RS232 debugging serial port DB9
Reset, Abort button, 4-channel status LED (power/CPU/PMC1/PMC2)
Rear panel P2 leads out: serial port, SCSI, PMC signals
6. Electrical&Environmental&Mechanical
Board type: 6U VME single width front plug-in main control
Power supply: VME backplane+5V, ± 12V
Typical power consumption: 18W (lower than MVME6100/7100)
Working temperature: 0 ℃~+55 ℃ Commercial temperature (without wide temperature version)
Storage temperature: -40 ℃ to+85 ℃
Weight: Approximately 1.76kg