GE IS200EPSMG1AEC | EX2100 EPSM Exciter Power Supply Module Mark VI Speedtronic

All products on this website are discounted products, and market prices have been fluctuating. Please refer to customer service quotes for details. Pictures are not actual photos. Before placing an order, please confirm the model, product, price, and other detailed information with customer service. Both second‑hand and brand new products are available for sale on this website. Please contact customer service for further communication.

GE IS200EPSMG1AEC | EX2100 EPSM Exciter Power Supply Module Mark VI Speedtronic

IS200EPSMG1AEC is the EPSM (Exciter Power Supply Module), a rack‑mount power conversion board produced by General Electric for GE Speedtronic Mark VI and EX2100 static excitation control systemsAX Control…. This module receives 125 VDC input power from the EPDM power distribution module, then converts it into multiple regulated, isolated low‑voltage DC rails to feed EGPA, EGDM, ECTB and other critical EX2100 control and I/O boards inside the excitation cabinet.

It monitors its own output voltage health, reports power‑supply fault alarms over the EPBP backplane to the main Mark VI controller HMI. This is a fundamental building block for both simplex and redundant EX2100 excitation architectures. Power generation MRO departments source IS200EPSMG1AEC for planned outage overhaul, excitation‑system power‑related failure repair, cabinet retrofits and critical spare‑part inventory stocking. Original OEM manufacturing has been discontinued; worldwide supply relies on new‑old‑stock surplus and fully refurbished bench‑tested units.

Key Features

• Dedicated EPSM power‑supply hardware for GE EX2100 excitation platform, plugs directly into EPBP backplane slots without additional adaptersAX Control…
• Accepts 125 VDC primary input from EPDM module, generates multiple stabilized DC output rails for excitation logic boards
• Integrated hardware protection circuits: over‑voltage, over‑current and short‑circuit protection for each output channel to prevent cascaded board damage
• Multiple on‑board fuses and test points for rapid field troubleshooting and voltage verification
• Front‑panel LED status indicators for power‑good and fault conditions, assisting technicians for on‑site diagnostics
• Conformal‑coated power‑dense PCB assembly, built to withstand vibration, dust and high‑EMI interference inside power‑plant control cabinets
• Real‑time power‑rail health monitoring; pushes fault and degradation alerts via backplane communication to Mark VI alarm list
• Supports simplex, dual‑redundant and triple‑redundant EX2100 configurations; allows fast module hot‑swap during planned unit shutdowns
• Static‑sensitive power assembly; ESD‑safe handling procedures are mandatory during installation and servicing

Technical Specifications

• Part Number：IS200EPSMG1AEC
• Manufacturer：General Electric (GE)
• Product Type：Exciter Power Supply Module (EPSM)
• Compatible System：GE Speedtronic Mark VI, EX2100 Excitation Control System
• Input Power：125 VDC supplied from EPDM power distribution module
• Regulated Outputs：+5 VDC, ±15 VDC, +24 VDC and auxiliary regulated rails for EX2100 peripheral boards
• Mounting：Plug‑in rack‑mount onto EPBP backplane inside EX2100 control cabinetAX Control…
• Operating Temperature：‑20 °C ~ +60 °C
• Storage Temperature：‑40 °C ~ +85 °C
• Humidity：5‑95 % non‑condensing
• Protection Class：IP20 (cabinet‑mount installation only)
• Interfaces：EPBP backplane connector, multi‑channel DC power outputs, status monitoring signals
• Status：OEM discontinued, available as NOS surplus & professionally refurbished tested units
• Handling Requirement：ESD‑sensitive device, anti‑static tools required

Typical Applications

1. Combined‑cycle power plant EX2100 generator excitation cabinet power‑supply replacement
2. Gas turbine Mark VI control rack excitation subsystem maintenance and spare‑part swap
3. Steam‑turbine generator static excitation system overhaul and scheduled outage component renewal
4. Power‑plant emergency repair triggered by excitation logic power loss, low‑voltage alarms or board power faults
5. Legacy GE EX2100 excitation‑system retrofit and spare‑part stocking for simplex and redundant installations

Compatibility Notes

IS200EPSMG1AEC is a specific hardware revision variant of the EPSM family. Always cross‑validate EPBP backplane revision, EPDM module hardware, EX2100 firmware version and original project BOM before ordering replacement units. This power‑supply module works in coordination with EPDM and cannot function standalone. Do not confuse EPSM IS200EPSMG1AEC with other EX2100 boards such as IS200EGPAG1ABC EGPA pulse‑amplifier board; they serve different functions and are not direct drop‑in substitutes. Full part‑number suffix matching is required to avoid hardware mismatch.

Product Condition & Supply Information

Original GE manufacturing for IS200EPSMG1AEC has been discontinued. Available stock consists of new‑old‑stock surplus and fully refurbished assemblies. Every unit should complete comprehensive bench testing prior to shipment, including full‑load output‑voltage validation, over‑current/short‑circuit protection test, backplane fault‑alarm reporting verification, fuse continuity check and LED indicator functional test.

Hot selling models

GE BRAND

Recommended other models

GE IS200AEPGG1AAA | AEPGG Pitch Gate‑Drive Interface PCB
IS200AEPAH1BKE IS215WEPAH2BB | GE Mark VIe Wind Pitch Control Boards

Supplies industrial spare parts covering well‑known international brands: ABB, GE, Bently Nevada, Emerson, Honeywell, Schneider, EPRO, Yokogawa, Woodward, Foxboro and Invensys TRICONEX.

We maintain ample stock, offer fast lead times and deliver products with stable, reliable quality.

• ✅ ABB: PP846 HMI Touch Screen, 5SHY Series IGCT, PM Series Controllers, AI/DO I/O Modules, SP Series Bailey Modules
• ✅ GE: VMIC, IS200 & IS215 Series CPU and Modules
• ✅ Emerson: Control Modules, EPRO Probes
• ✅ Westinghouse: 1C Series Modules
• ✅ Honeywell: CC Series Modules
• ✅ Schneider: 140 Series Modules
• ✅ Triconex: Full Series Safety Instrumented System Modules
• ✅ Bently: 3500 Series Vibration Monitoring System
• ✅ Rexroth: Industrial Motors & Drives
• ✅ Foxboro: Compact Control Modules