GE IC670MDL740J｜12/24VDC Output Module In Stock｜

Core parameters (MDL740J same as MDL740)
Channel: 16 point source PNP output, grouped on common ground, no isolation between channels
Output voltage: 10-30VDC (nominal 24VDC), externally supplied by the load power supply
Single channel current: 0.5A/point; The maximum steady-state of the module is 4A
Surge: Single channel maximum 2A, duration ≤ 100ms
Backplane logic power consumption: 111mA (6.5V backplane)
Isolation: On site logic side photoelectric isolation, 1500VAC 1-minute withstand voltage
Protection: The entire module shares a 5A slow melting main fuse, without single channel independent overcurrent protection; Report fuse failure to BIU/PLC
Response time: Maximum 200 μ s (on/off)
LED: power, fuse fault indicator light+16 channel status light
Data: 16DO occupies a 2-byte Genius output buffer with output read back verification
Environment: Working temperature from 0 ℃ to+55 ℃; Storage -40~+85 ℃; UL、CE； I/O hot plugging, module diagnostic reporting
Key points of revision for version J
No hardware specification changes, no changes to current, voltage, or wiring methods;
Fixed early versions: output read back false alarm, occasional output jitter in low-temperature environments;
Priority for old system spare parts in version J; No need to modify the program, simply replace the old MDL740 in place.
Typical Applications
Genius remote I/O station, driver panel indicator lights, light signs, 24V small intermediate relay;
A large number of switch output points for power plant auxiliary control, water treatment, and transmission lines;
Cooperate with IC670CPU350 local intelligent station for on-site output;
It is not recommended to directly drive the solenoid valve. It is recommended to use IC670MDL730 or transfer it through an intermediate relay for the solenoid valve.