GE IC670GBI002｜Fanuc Interface Module｜

Core parameters
Model: IC670GBI002 (24VDC power supply version; There is also IC670GBI102 AC power supply version available
System: GE Fanuc Field Control/Genius I/O Distributed System, discontinued spare parts
Maximum single station I/O module: 8 IC670 series I/O modules (digital/analog)
Data exchange: Input 128 bytes/Output 128 bytes (all I/O on this site are mapped to the Genius bus)
Genius bus: speed 153.6 kbps, 50 Ω dual coaxial cable; Bus logic side isolation 1500VAC
Station address: Dial code to set Genius node address
Power input: 18-30VDC (nominal 24VDC), maximum power consumption 16.8W
Backplane output: Provides 6.5VDC to the downstream I/O module, maximum 1.4A
Base: Must be equipped with IC670TBM002 terminal base and DIN rail installation; Cannot use A-version old base, high grounding requirements, DIN rail must be conductive grounded
Hot plugging: I/O modules support hot plugging, module failures are reported to the host, and bus scanning is not interrupted
Working temperature: 0 ℃~+55 ℃; Storage -40 ℃~+85 ℃; IP20； Certified UL and CE
Indicator lights: PWR, BUS ACTION, RUN, OK; Monitor debugging port (handheld monitor)
Main functions
Genius bus slave station maps up to 8 local I/O modules to a node on the Genius network and exchanges I/O data with the host PLC
Backplane power management, providing power supply and overload protection for all I/O modules in the station
Complete diagnosis: Report module missing, faults, and communication abnormalities to the main PLC; Support handheld monitor debugging of I/O on this site
Supports Genius dual bus redundancy, host CPU hot standby system, compatible with GE hosts such as 90-30, 90-70, RX3i, etc
No user program, cannot run independently, must rely on the upper PLC; If local independent control is required, replace GBI002 with IC670CPU350 as the station head