Multi-Protocol Supporthttps://www.saulabb.com/product/com0034-2rca023019a0004c/

The module provides strong compatibility and supports mainstream industrial communication protocols, enabling seamless integration with a wide range of automation systems:

Modbus RTU/TCP:
Ideal for standard data exchange with PLCs (e.g., Siemens S7 series, Schneider M340) and SCADA systems.

PROFINET IO:
Designed for high-speed real-time control, compatible with PROFINET master devices from leading manufacturers such as Siemens and ABB.

EtherNet/IP:
Fully compatible with Rockwell and other EtherNet/IP-based networks, widely used in North American and Chinese industrial automation systems.

Plug-and-Play Design for Easy Integration

Equipped with a standard RJ45 Ethernet interface (supports 10/100 Mbps adaptive communication).

Certain versions are fitted with RS-485 terminals for Modbus RTU communication.

Supports module-level hot plugging (dependent on system hardware design), allowing replacement without system shutdown, minimizing production interruptions.

ABB configuration tools such as DriveComposer enable quick parameter setup (IP address, slave address, data mapping) without complex programming.

Industrial-Grade Reliability

Protection Rating:

Standard version: IP20, suitable for installation inside control cabinets.

Optional version: IP54, suitable for outdoor or dusty environments.

Environmental Adaptability:

Operating temperature range: –25 °C to +70 °C

Resistant to industrial-grade electromagnetic interference (EMC) in compliance with EN 61800-3 standards.

Designed for harsh industrial environments such as power generation, chemical processing, and metallurgical plants.

Status Monitoring and Fault Diagnostics

Equipped with LED indicators for power, communication link, and data transmission status, allowing clear visual monitoring of operating conditions.

Supports communication fault alarm output (dry contact). When a protocol interruption or link abnormality occurs, an alarm signal can be sent to the PLC or supervisory system for quick troubleshooting and maintenance.

Application Scenarios

Frequency Converter Communication Extension:
Commonly used with ABB ACS880 series high-performance drives, extending PROFINET or EtherNet/IP communication for real-time speed control, torque regulation, and fault feedback with PLCs.

Multi-Device Networking:
Enables integration of sensors, actuators, and host controllers from different brands, unifying data collection (e.g., motor speed, current, temperature) and control across the production line.

Remote Monitoring:
Facilitates data transmission to MES systems or cloud platforms for remote parameter adjustment, fault diagnosis, and reduced on-site maintenance workload.