GE IS200ERDDH1ABA | EX2100 ERDD Exciter Regulator Dynamic Discharge Board Mark VI Speedtronic

All products on this website are discounted products, and market prices have been fluctuating. Please refer to customer service quotes for details. Pictures are not actual photos. Before placing an order, please confirm the model, product, price, and other detailed information with customer service. Both second‑hand and brand new products are available for sale on this website. Please contact customer service for further communication.

GE IS200ERDDH1ABA | EX2100 ERDD Exciter Regulator Dynamic Discharge Board Mark VI Speedtronic

IS200ERDDH1ABA is the ERDD (Exciter Regulator Dynamic Discharge) double‑height VME printed‑circuit board manufactured by General Electric for GE Speedtronic Mark VI / Mark VIe and EX2100 static excitation control systems. This is a core IGBT gate‑drive and hardware over‑voltage protection board for EX2100 regulator power stack. It receives command signals from ERIO controller board, generates high‑speed gate drive pulses for ERSC static converter IGBT modules, executes dynamic discharge clamping to suppress dangerous DC‑link over‑voltage during load rejection or system transients, and collects comprehensive bridge operating feedback back to the main turbine controller.

It controls critical excitation relays: K41 de‑excitation relay under simplex configuration and K3 pre‑charge relay within redundant architectures. It monitors DC‑link voltage, field output voltage, shunt current, bridge temperature and IGBT desaturation fault status. Power generation MRO departments procure IS200ERDDH1ABA for planned outage overhaul, excitation‑trip emergency repair, EX2100 cabinet retrofits and critical spare‑part inventory stocking. Original OEM production is discontinued; global supply is limited to new‑old‑stock surplus and fully refurbished bench‑tested units.

Key Features

• Standard 6U double‑height VME form‑factor, plugs directly into ERBP simplex backplane or ERRB redundant backplane slots without additional adapters
• High‑speed IGBT gate‑drive control for ERSC static converter modules, delivers precise firing signals for excitation power conversion loop
• Hardware‑level dynamic discharge function: autonomously clamps excessive DC‑link voltage independent of main CPU logic, protects generator rotor and power semiconductors against destructive over‑voltage transients
• Multi‑point bridge feedback acquisition: DC‑link voltage, field output voltage, shunt output current, bridge temperature, IGBT gate‑supply health and desaturation fault detection
• Relay drive capability: controls K41 de‑excitation relay for simplex systems; controls K3 DC‑link pre‑charge relay for redundant EX2100 installations
• Conformal‑coated industrial PCB assembly with surge suppression and EMI filtering, stable performance under high‑noise power‑plant cabinet operating conditions
• Reports all measured parameters and hardware faults via VME backplane bus to Mark VI HMI alarm list for operator visibility
• Supports both simplex and dual‑redundant EX2100 regulator architectures; allows module swap‑out during scheduled unit shutdown windows
• ESD‑sensitive assembly; anti‑static handling procedures are mandatory for installation and field servicing

Technical Specifications

• Part Number：IS200ERDDH1ABA
• Manufacturer：General Electric (GE)
• Product Type：Exciter Regulator Dynamic Discharge Board (ERDD)
• Compatible System：GE Speedtronic Mark VI, Mark VIe, EX2100 / EX2100e Excitation Control System
• Core Function：IGBT gate‑drive control, DC‑link dynamic discharge over‑voltage protection, power‑bridge signal feedback, K3/K41 relay control
• Form Factor：6U double‑height VME single‑slot module
• Power Input：+5 VDC, ±15 VDC, +24 VDC supplied via ERBP / ERRB backplane from EPSM power modules
• Mounting：ERBP backplane (simplex); ERRB backplane (redundant M1/M2 side)
• Operating Temperature：‑20 °C ~ +65 °C
• Storage Temperature：‑40 °C ~ +85 °C
• Humidity：5‑95 % non‑condensing
• Protection Class：IP20 (cabinet‑mount installation only)
• Interfaces：VME P1/P2 backplane connector, signal interface to ERIO and ERSC static‑converter board, relay control outputs
• Status：OEM discontinued, available as NOS surplus & professionally refurbished tested units
• Handling Requirement：ESD‑sensitive component, ESD protective measures required

Typical Applications

1. Combined‑cycle power plant EX2100 generator excitation regulator IGBT power‑stack replacement
2. Gas turbine Mark VI / Mark VIe excitation cabinet ERDD hardware maintenance and spare‑part swap
3. Steam‑turbine generator static excitation system overhaul and component renewal during unit outages
4. Emergency repair for excitation trips caused by DC‑link over‑voltage, IGBT faults or de‑excitation relay failures
5. Legacy EX2100 excitation‑system retrofit and spare‑part stocking for simplex and dual‑redundant regulator sites

Compatibility Notes

IS200ERDDH1ABA is a specific hardware revision variant of ERDD family. Before replacement, verify ERBP / ERRB backplane revision level, ERIO board revision, ERSC static‑converter hardware, EX2100 firmware version and original project BOM. This board must work as a system set together with ERIO and ERSC modules and cannot run standalone. Do not confuse IS200ERDDH1ABA with IS200ERDDH1ABB; they are different hardware revisions and are not guaranteed direct drop‑in substitutes. Related EX2100 series hardware includes IS200ERIOH1A, IS200ERSCH1 series, IS200EPSMG1AED. Full part‑number suffix matching is strongly recommended to avoid hardware mismatch.

Product Condition & Supply Information

Original GE OEM production for IS200ERDDH1ABA has been discontinued. Available inventory consists of new‑old‑stock surplus and professionally refurbished assemblies. Every unit shall complete comprehensive bench validation before shipment, including IGBT gate‑drive output simulation, dynamic discharge over‑voltage trigger test, bridge‑feedback signal verification, K3/K41 relay drive test, VME backplane communication check and fault‑alarm reporting validation.

Hot selling models

GE BRAND

Recommended other models

GE IS200EPMCH1 | Mark VI Mark VIe PMC Mezzanine Daughter Card EPMC Module
GE IS200EGDMH1AFF | EX2100 EGDM Exciter Ground Detect Module Mark VI Speedtronic

Supplies industrial spare parts covering well‑known international brands: ABB, GE, Bently Nevada, Emerson, Honeywell, Schneider, EPRO, Yokogawa, Woodward, Foxboro and Invensys TRICONEX.

We maintain ample stock, offer fast lead times and deliver products with stable, reliable quality.

• ✅ ABB: PP846 HMI Touch Screen, 5SHY Series IGCT, PM Series Controllers, AI/DO I/O Modules, SP Series Bailey Modules
• ✅ GE: VMIC, IS200 & IS215 Series CPU and Modules
• ✅ Emerson: Control Modules, EPRO Probes
• ✅ Westinghouse: 1C Series Modules
• ✅ Honeywell: CC Series Modules
• ✅ Schneider: 140 Series Modules
• ✅ Triconex: Full Series Safety Instrumented System Modules
• ✅ Bently: 3500 Series Vibration Monitoring System
• ✅ Rexroth: Industrial Motors & Drives
• ✅ Foxboro: Compact Control Modules